Garden Tractor Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-19 of 19 Results
  1. Bolens Tractor Forum
    Hey folks. Had the 800 running since spring, rebuilt the clutch and mower deck. Runs strong but has one issue. when travelling a direct bump will cause the wisconsin s7d engine to sputter for a second or two then come back to speed. Thinking something grounding in the primary but have been...
  2. Bolens Tractor Forum
    Hi folks, new owner of old machine. 1963 800 Got it running and freed the frozen clutch. When not runing the clutch releases and the drive shaft is easily turned. With engine running depressing the clutch moves the clutch flange ( part 100) away from the pulley but it then solwly works itself...
  3. Bolens Tractor Forum
    Hey everyone I just did a transaxle flush on my bolens 1000 and was just wondering if their was a safe cleaning solvent or solution to flush out the old sludge and grime without harming the brass parts? I know I have to use GL-1 mineral oil (which is the hardest Crap to find! Lol) so I don’t...
  4. Bolens Tractor Forum
    had a though that someone else might have had this same issue and same thought process and may have already found a good solution my cousin and I bought a pair of old bolens a couple years ago. We're pretty mechanical, however, these pre-date us by a few years. I took the 650, he took the...
  5. Bolens Tractor Forum
    For once I did not have to make a road trip to get a tractor! It came to me. A young kid had a 63 Bolens 800 tractor he wanted to trade me for my 650 parts wreck out back. So I said as long as you can deliver it. I dragged the 650 out from it's resting place and proceeded to bring it out front...
  6. Bolens Tractor Forum
    I got the Parts that I sought thanks to Rick and Ricks Bolens Parts. You now see a before and after of getting the fuel tank profile down to where its suppose to be. Before.... After.... Behold!.....The test fit of the Hood. The hood fits on it! The first time the hood has fit on it...
  7. 20160315 073348

    Yea!, Test fit of the hood Carb view.
  8. Test Fit of the Hood Tank Side

    Yea!, Test fit of the hood tank side view
  9. Test Fit of the Hood

    Yea!, Test fit of the hood
  10. Bolens tank and a 1055 tank Barcket

    The after Pic of the 1055 (G10) tank bracked mounted on the HH100. Much Lower Profile I think The hood will fit now.
  11. Original Tecumseh Tank

    The original fuel tank that came with the HH100. WAY to tall for the hood. Before Image.
  12. Sleeve Hitch Lift arm

    Sleeve Hitch Lift Arm detail
  13. Sleeve Hitch Attached With Plow

    Completed Sleeve Hitch with the plow attached
  14. Plow Armed

    Plow Ready to go!
  15. Parts
    I am wanting to eventually put the hood back on my Bolens 800. The Tank that is on the current engine sits too tall. I want to put an original tank back on it to get the height back down. In that case am looking for a Metal Fuel Tank for a Bolens Tube Frame tractor. It looks like I can make any...
  16. Serial Tag

    The serial plate off of my Bolens 800
  17. Parts
    I am looking for a input shaft for a bolens 800 3 speed transmission. Pm me If you have the shaft, or if you are at a reasonable distance away, a parts tractor or whole transmission. Thanks Damon
  18. Ford/Jacobsen/Moline/Oliver/Town & Country/White
    Recently I picked up a Jacobsen Chief 800 from an older woman who's husband had just died and knew nothing about the tractor so she gave it to me for free and it came with a mower deck, snowblade, and a half buried Jacobsen Chief 100A with a wrong engine. So far I have around $70 in it and it...
  19. Bolens Tractor Forum
    Alright guys, Dad's Bolens 800 and 1000 are making noises and I believe it is the clutch/driveshaft bearing. Are these a standard size bearing that I could get somewhere at a local shop or are they special and will need to be sourced? I know there is a plate that sandwiches the bearing in place...
1-19 of 19 Results