Search Results for ‘carburetor’

Hi All My 1220 carburetor linkage is loose and before I take it apart i was wondering if any has the settings of all the parts that are adjustable. I can adjust a carburetor but not sure on the set up. I moved it some when it was zero out and could use some help. Sorry tried to edit the...

Hello, I have a Sears Craftsman 853C and I would like your help in confirming the engine type. I believe it is a Tecumseh V60 (6hp)? A previous owner removed the name plate. I believe the engine is incomplete because I have the intake manifold (although the mounting flange in broke) and the...

So my grandpa gave me this sweet lawn and garden tractor. First question, what series is this? He thought 1655. It has front and rear pto, hydraulics, and came with a front plow, rear box scraper, harrow, sprayer, and tiller. He broke the casing on the carburetor air adjustment screw so now it...

Sorry, I am new here! I recently purchased a GT 18 I don't know a whole lot about it. Before i purchased it sat for quite sometime, it does have some carb issues. I was wondering if anyone sells them new or if they are worth rebuilding? Thank you for your time! Model #917.257112 Onan Engine #...

We got quite a bit of snow over the weekend in the northeast and we probably got at least a foot to 16" of snow here in the Albany area. So, Sunday I needed to try to fire up my Bolens Estate Keeper to snowblow my driveway. Earlier in December, I got the Sno-Caster attachment (and my plow...

I HATE the Walbro carb on my '69 140, so I broke down and bought one of the cheap Chinese copies, from this guy: https://www.ebay.com/itm/Carburetor-For-Kohler-K321-K341-Cast-Iron-Engine-Carb-Carb-Cub-Cadet-US-SELLER/282845911040?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 I don't...

My 1946 Frazer B1-6 is in pretty good shape and has likely been in storage for 10 years or more. It was originally delivered (according to a note on the literature) on May 5, 1947. Before I go on, let me say this isn't my first overhaul of something, but it will be my first full restoration...

Hello all, this is my first post! I'm having an issue with my John Deere X300 riding mower. The spark plugs are constantly fouling (black carbon deposits on them) after a few uses. From what I've read, this means the carburetor is running hot. I've tried switching to a higher temperature rated...

I have a major problem with my Bolens. It just stopped running on me while I was breaking new ground in a field. I went to start it today and adjust the choke and the whole carb moved. Turns out it broke off before the flange where it connects to the engine. What do I do now? It's cast so I'm...

I am having a heck of a time with my 1968 Bolens Estate Keeper EK-10. It has sat for a couple of years since it stopped running a while ago and I haven't had the chance to try to fix it for a while. I started working on it earlier in the summer and I found the gas tank looked pretty rusty and...

Looking for suggestions/help with my homelite t-16 that I cannot get to run right. It was not running when I acquired it, I replaced the coil and plug and got it running. Installed a carb rebuild kit and it ran a little better, but had trouble getting the high speed right. this weekend I cleaned...

I'm in search of a carburetor for an hh120 tecumseh. I have not been able to find any numbers on my original. I'm rebuilding one for a friend and his is missing.

I set the valves on the cub 2146 and cleaned the carburetor. Noticed the throttle valve was not seating in the throttle body so I backed off the idle adjustment screw so it would seat. Changed the oil and cranked it up. Idled fine with no surging mowed for about 30 min and it was running a...

i am new to this site and cant find specifically where to post, so i apologize if im posting in the wrong spot. i need help with my gravely. its a 1963 7.6 super convertible walk behind i do not know what motor it has the tag is gone. i can get it to fire by putting fuel down the cylinder. but...

Greetings from Maryland. My step-father gave me this 1225 a few years back and i cobbled it together enough to have a snow blower for the past 3 years (no snow the first 2 years and then wham! this year). It saved me enough shoveling that I figured it deserved some TLC. This will be a very...

Well, once again I'm stumped by fuel problems on mom's GT18. I cleaned the carb and put new gaskets and needle in it when we first bought the tractor. I also rebuilt the fuel pump that's on the side of the carb and replaced the fuel filter. It ran fine for a couple weeks, but then started...

Running out of luck finding a replacement LME34 carb - and knowing that a lot of folks have issues with worn bushings I can't trust what I'm finding on Ebay. Have any of you found a suitable replacement carb that can be bought new, and doesn't require extensive modification or reworking of...

This 1989 JD 318 with the LX790 engine seems to run a little rough. I'd like it to run smoother. However their doesn't seem be any carb adjustments, other than idle. I'll change out the plugs and see what that does, I've choked the engine down slowly to see if it starts to smooth out, but it...

Does anyone know anything about Husqvarna Chainsaws? I have a 235E made around 08, I picked it up really cheap. It ran decent when I got it, but it had a few issues like a broken coil. It would run but because the coil was broken you had to hold the wire to ground to kill the saw. I replaced...