Garden Tractor Forums banner
clutch
1-18 of 21 Results
  1. Garden Tractor Forum
    So my penncraft has always done this. When in neutral. With the clutch released, it would always make a lot of noise. I don't think it's the transmission, I don't hear the transmission making it, I hear the belt making it. What could it be? All replies are thanked
  2. Bolens Tractor Forum
    Recently my 650 began to take a long time to move when the gears are engaged. When it does start to move forward or backwards it is very slow. I am thinking it could be the clutch? I am assuming the 650 has a belt drive for the clutch? How do I adjust the clutch on a 650? Thanks
  3. Ford/Jacobsen/Moline/Oliver/Town & Country/White
    Any help appreciated in locating new or used electric pto clutch. Single cylinder Kohler's units will not work on K532 twin due to crankshaft size. If you have used, hopefully its better than the one I have. Currently having the coil rewound. But clutch faces are heavily grooved from slipping...
  4. Power King, Economy Tractor Forum
    Recently acquired a very beat up jim dandy, dressed to look like it was in much better condition. Kicking myself for having not seen all that was wrong with it... about 10 different sorts and grades of hardware, missing washers, stripped threads, governor gear blown in the old briggs and was...
  5. David Bradley Tractor Forum
    Hello all I'm restoring a 1956 917.575112 that was gifted to me by a friend. This unit has the ball lock clutch. I removed 9 balls from mine but I see evidence that someone has been into the clutch before me so I don't know how many should have been in there. I measured two of the balls at...
  6. Kubota Tractor Forum
    Was given a tractor lately. Due to the injector and clutch problems, dealer is estimating $2400 in repairs not including the full service of fluids and filters, and then new tires all the way around. Unit has 2,000 hours on it. No rust. Is it worth fixing or should I part it out and buy...
  7. Power King, Economy Tractor Forum
    Has anyone used a clutch rebuilding service for a 1614 Power King ?
  8. Walk Behind Garden Tractor Forum
    Hi, I have just acquired a Bcs 725 I believe with a 10hp Acme engine. The Clutch was stuck so I removed the engine and the clutch. The issue I am having is the bolt that holds the clutch to the tapered crankshaft keeps falling out. I keep tightening it up and it comes out almost right away is...
  9. Idler clutch assembly

    Attachment kit for sears snow thrower
  10. Cub Cadet Tractor Forum
    I inherited a great uncles cub 169. He bought it new and never let it set outside or unwashed. Started it up to mow a small area and the drivetrain just stopped? I grew up mowing his lawn on this tractor,,it never failed to do anything! Looking for input and advice! New member here, hello to...
  11. Massey, Snapper, AMF Tractor Forum
    Hi There, Looking for a little help with the rear PTO on a Massey 1650. I purchased it from a fella who had rebuilt the engine and transmission. It's running great, but it looks like at some point there was an electric clutch for the rear PTO that was removed. There is still a switch for when...
  12. Power King, Economy Tractor Forum
    I'm looking for information regarding the clutch assembly on a 1958 Economy with Wisconsin AENL engine. Is there a spacer or bushing that sets the proper distance for mounting the clutch flywheel/pulley assembly onto the engine's output shaft? I'm guessing that something is required in order...
  13. Mechanical & Hydraulics Forum
    Hi I recently bought a MF-12 from a friend, I have started by cleaning it up, taking of the engine etc- but would like to know, do I have a 10 or a 12, the hood says 12 but the chassis says 10, also I assume I lost a belt or two, and in the manual I downloaded I can not figure out the sizes or...
  14. Ariens Tractor Forum
    I just bought a 936037 Ariens 42" Gear (manual transmission) Garden Tractor from Home Depot (already I'm thinking this it was not a good idea to buy this from them). Here is a link to the Operations Manual: http://www.manualslib.com/manual/475386/Ariens-936037-42-Gear-Tractor.html#manual 1st...
  15. Parts
    I need cheap parts for bolens husky 3 speed. braking parts, clutch, gear wheel... offer me anything that usually worn off easily. (with a picture helps) shipment to Finland, so not too big / expensive parts. Thanks! (I have the brake/clutch worn off so much that i we been maybe broke the...
  16. Bolens Tractor Forum
    Hi gang, I started digging into my 850 I acquired several months back to see what I can find out of why the clutch doesn't work. So far all parts seem to be there according to the parts diagram. Now, I read on how to adjust. Here is where my confusion comes in. "CLUTCH ASSEMBLY (3-SPEED...
  17. Ariens Tractor Forum
    A big "hello" to everybody. Just found out about GardenTractorTalk and checked out some of the forums as a guest. Seemed more than worth the time to sign up and "get involved". I like older equipment (my Dad's fault, probably - we never bought new, just took others' cast-offs fixed 'em and...
  18. Power King, Economy Tractor Forum
    So i figured instead of starting a new thread every time I had a question that it was time to give my old tractor its own thread. So I have a K361 coming next week with all the correct specs for a Power King transplant which would be the correct flat oil pan, flanged block and 1 1/8'' output...
1-18 of 21 Results
Top