Garden Tractor Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-7 of 7 Results
  1. Sears, Craftsman Tractor Forum
    Just creating a topic for the fluid type and parts diagrams. My unit is working but shifter is a little sloppy. Not sure if that's normal or if I'm missing a boot for up top or something. The shift lever has a removable top cap with 4 bolts attached to trans/dif unit and it looks as though I...
  2. Bolens Tractor Forum
    I picked up a rough looking 234-01 that I want to restore mechanically for use as a working tractor. I've replaced the tires, overhauled the engine, I was able to buy bearings & seal for the differential area but need to go through the transmission as well. The tractor operates in all three...
  3. Massey, Snapper, AMF Tractor Forum
    I have a 1967 MF10 with hydro-speed transmission. This tractor has been a hobby of mine for the last 3 years, working on it whenever I had an hour to spare. I now have it running relatively well, with one BIG exception - I can't shift the transmission with the engine running without clashing...
  4. Scrap Yard
    Need the right rear diffy gear, part I believe is 2025700, it's a gear that roller pins go into and that attaches to the back side of the hub. PIc attached-part on left.
  5. Power King, Economy Tractor Forum
    broken drive shaft and I need to remove it from the differential. I have removed all the bolts from the case where the drive shaft goes into it. Now it looks like I need to remove the bolts from the frame where the differential final drive is bolted on and 4 nuts hold this in place. The...
  6. Bolens Tractor Forum
    Greetings from Maryland. My step-father gave me this 1225 a few years back and i cobbled it together enough to have a snow blower for the past 3 years (no snow the first 2 years and then wham! this year). It saved me enough shoveling that I figured it deserved some TLC. This will be a very...
  7. John Deere Tractor Forum
    Hello all, I have a 1967 JD110 that I like to take to the local pulls and such but one thing I've found is that the trans-axel seems to be a slip differential! Was wondering if anyone has had success welding them solid or if there is a suitable swap that would work
1-7 of 7 Results