Garden Tractor Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-5 of 5 Results
  1. Ford/Jacobsen/Moline/Oliver/Town & Country/White
    A few years ago, I replaced a cracked and split drive pulley and cracked clutch spindle. The engine had worked well for the 30 or so years previous but had always had a knock which I think I traced to this drive pulley and clutch spindle which appeared to have too much play where the "keys" fit...
  2. Ariens Tractor Forum
    Hi All, My Gt14 has three metal fingers that capture the drive belts on the rear axle. It has recently been throwing the belt when I use it to snow blow. Are they supposed to be set like this? Basically top one is a little before 12 o'clock, second one is right around 3 o'clock, and bottom...
  3. Sears, Craftsman Tractor Forum
    Hello all, Back in March I thought I would start plowing for the spring garden season and I fired up the old Sears with the moldboard plow hooked up, ready to go. I got to the plot, started plowing and got into a second row when the tractor wouldn't go forward anymore. Pulled up the plow and...
  4. Massey, Snapper, AMF Tractor Forum
    I drug a not running MF10 home about 15 years ago,now its time to get it done. MF10 serial number 1446021155, tell model year from serial number? Crankshaft drive pulley is missing,any know correct dimensions or of a replacement part number? Thanks
  5. Sears, Craftsman Tractor Forum
    I recently acquired a GT6000 (917.255981) which is missing the drive pulley (136907). Sears Parts Direct says it's no longer available and I've not been able to find it, or specs on it, anywhere else. Can anyone tell me if this is a normal pulley and what it's diameter is? Thanks, Duane
1-5 of 5 Results