Search Results for ‘driveshaft’

Solid 48" mowing deck for a Bolens garden tractor. It is heavy duty shaft drive. The deck is solid and the blades are in decent shape. The driveshaft, ujoints, and gearbox feel great. Spindles are easily greasable from the top. $180 for the deck and driveshaft. $120 for the deck without the...

I have an MTD 860 tractor that came with a Unico 193-962 mower deck. I am missing the scissor brackets as well as the 717-135 drive shaft.

Hey.Here we go again! Looking for more imposable to find parts. Looking for a driveshaft or any place to get one made for a tiller on a 59 ride a matic. Got what I thought was a deal on a tiller till I realized shaft was missing. Already got the gears in gearbox remade and now for the shaft...

Hey everyone. Got another ride a matic project in need of parts. Got a tiller. Missing driveshaft and gears in gearbox stripped. Any help? part nos. 1709835 bevel gear 2 needed 1709844 driveshaft. could be used 1709804 lift bar. also could be used. Any help on these parts would be greatly...

broken drive shaft and I need to remove it from the differential. I have removed all the bolts from the case where the drive shaft goes into it. Now it looks like I need to remove the bolts from the frame where the differential final drive is bolted on and 4 nuts hold this in place. The...

Yesterday, after a long and stressful day. I thought I would take the S-16 for a short workout in the garden. My plans were to run the cultivator through it and stirr it a bit to help it dry out. After several passes to get the cultivator set right, it was finally going good. Then, a loud snap...

For sale: Double u-joint driveshaft for tillers that fit Bolens Tube Tractors. This shaft will fit most all tube frame tractors, except the model 600 (takes a shorter shaft), This driveshaft is used on 22" tiller (model 18610) and 25" tillers (model 18616). The overall length is approx. 38...

Alright guys, Dad's Bolens 800 and 1000 are making noises and I believe it is the clutch/driveshaft bearing. Are these a standard size bearing that I could get somewhere at a local shop or are they special and will need to be sourced? I know there is a plate that sandwiches the bearing in place...