Garden Tractor Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-7 of 7 Results
  1. Mechanical & Hydraulics Forum
    Hello There, Last year my sons and I refurbished/restored a Massey Ferguson MF10 as a 4H project. We didn't have a Tecumseh engine to put in it (original) so we put a Briggs 10 hp I/C Iron Core L Head (221432-0131-01) we had. Don't know what the original application was for it but the...
  2. Sears, Craftsman Tractor Forum
    Was looking online about setting the high and low governor found on some briggs engines, and noticed two different locations for the low speed spring.. Mine is the first pic, 2nd pic is online of same engine, I seen them both ways online. Engine is a cast iron 14hp briggs number 320421 anyone...
  3. Garden Tractor Forum
    I have a Tecumseh OH 160 on a Bolens H16xl. I am currently having trouble with the governor. When I have the engine running and turn on the pto for mower deck the rpms drop very low and I have to use the throttle to bring them back up. When I turn off the pto it revs way to high and I again...
  4. Garden Tractor Forum
    I have a Tecumseh OH 160 on a Bolens H16xl. I am currently having trouble with the governor. When I have the engine running and turn on the pto for mower deck the rpms drop very low and I have to use the throttle to bring them back up. When I turn off the pto it revs way to high and I again...
  5. Gilson Tractor Forum
    I suspect governor not operating correctly.. When I open throttle slightly,engine revs all way up ? 1966 Briggs 10 hp. model#243434 type#0147 01 code#6612061 Maybe air vane under flywheel housing ?? Do you have to remove engine to get housing off?
  6. Mechanical & Hydraulics Forum
    Some things to try to figure out engine hunting and surging
  7. John Deere Tractor Forum
    hi, the governor for my 8hp kohler is missing and was wondering if anyone had an extra and would sell it. i am missing nearly all the external parts. thank you -michael
1-7 of 7 Results
Top