Garden Tractor Forums banner
hydraulic cylinder
1-3 of 3 Results
  1. Ford/Jacobsen/Moline/Oliver/Town & Country/White
    How do you remove the hydraulic ram from the tractor? There isn't enough clearance to remove it? There is no way the sleeve will slide to the side. Any ideas?
  2. Case, Colt, Ingersoll Tractor Forum
    I sold my Dayton a couple weeks ago, and dragged my Case 444 out of hibernation... it started right up on 2 year old gas--Sea Foam does wondrous things!! I changed out all the fluids, etc., then went to work to install a 3 point hitch I bought a few months ago. The hitch was complete, but the...
  3. Ford/Jacobsen/Moline/Oliver/Town & Country/White
    had a chance to do a little to the 195 today. took the cylinder apart and found the seals in ok shape along with the bore. the chrome shaft was too pitted to work without tearing up the seals so i turned up a new shaft and reassembled. will try to get more done this weekend. thanks keith
1-3 of 3 Results
Top