Search Results for ‘kubota’

Hello Guys! Looking to replace dpf in my Kubota tractor, heard of a friend of mine there is a walkaround to avoid those regens in the future Anyone can recommend something, or someone? Any ideas much appreciated I have v1505 engine in my kubota tractor

I've had a G1800 Kubota mower for several years, and just picked up a G1900 all wheel steer. I want to change the tranny (hydraulic) fluid in both of them. Is there anything that is the equivalent to the Kubot UDT fluid? Thanks, Smitty

Hello everybody! I'm totally out of ideas why my 250 cc Kubota engine won't start. Everything was okay but the next day the engine would not start. No spark. The sparkplug seems to be okay, I replaced the ignition coil - and the wires - to new one. I disconnected the kill wire... Nothing, no...

When I started moving things to my shop I put them on pallets and crates, then covered them all with tarps since I didn't have a dried in roof, yet. I was moving things around today so the electrician can install lighting on the east side of the shop and I came upon this: It must not have...

At the risk of boring everyone, I thought I'd post an update as to what I've been up to the last couple years. I think most people are aware that i was able to leave my job at the Army Depot (a 65 mile drive each way) and go to work for the Air Force base which was 5 miles north of me. In...

So, I fired up my running GTs and decided to exercise them a little before I winterize them, and decided to get a picture of them. So here they are, taking some rays in our "On Again, Off Again" Indian Summer. Smitty

Very nice condition Kubota Power Blower and Grass Catcher, model GCK54-GR, fits GR series lawn and garden tractors, only used 388 hours. $375. These retail for over triple this price!

Up for sale is my Diesel Kubota G4200. Shows 993 hours, starts right up, runs great! Manual 3 speed trans with reverse, manual lift. It's a beast of a machine with tons of pulling power. Has a barely used set of Titan Tru-power AGs on the back, new oversize tires on the front, original rear...

Last summer I picked up an Onan RV Genset with a Kubota 3 cyl diesel (662?) in it. The genset runs at 1800 rpm and the engine puts out about 11hp at that rpm, but about 16 hp at 3600 rpm. I bought back my Bolens HT23, only it now has a daylight block (tough old bird still went up on my trailer...

Well, sometimes the good Lord answers prayers in a special way. We've been wanting to get a genset for backup power for quite some time, but could never quite get pass the hefty price tag. I have a portable 4,000 watt B&S genset that works well, but being gas driven it has all the challenges...

Just joined...trying to get info on the 1772 that I just acquired...The deck was not installed and in its place was a hydraulic bucket with 4 cylinders.. which I removed..I haven't looked for accessories..but suspect that the front loader /bucket is custom... Looks like the first thing I need...

I have an L185DT with 870 hours that runs great and has a lot of implements but the one thing I am missing is a front end loader. There are loaders available, but none of them are for the L185. I can see that the loader mounts to the underside of the transmission and behind the weight bracket in...

I have a Mahindra Max25 4x4 compact tractor that has the industrial type tires and wheels. I'd like to put Ag tires on it, but that requires a different wheel size for both the front and rear. Mahindra specifies a 9.5 x 16 rear tire, and a 6-12 front tire for the tractor. The rear wheel has a...

New old stock Sims cab for the Kubota b series tractor. I did go thru it and looks like only thing I see missing is the wiper arm and there may be some bolts and nuts the motor is there. This can ship or pickup here. Located in Ohio Asking $400

Is antifreeze (straight out of the bottle) okay to use as tire ballast? I've heard some say the chemicals will deteriorate the rubber and valve stem. Yet I've read several reports of folks using antifreeze. Anyone know the facts? (FYI, I have a Kubota B5100E that I just bought for $300 and it...

Turf Tires with Wheels. These are Titan 29x14-15 turf tires. 15 inch wheel, 29" diameter, 14 inches wide, with an 8 ply rating!! The wheels have the 6 hole on 6" centers used by Kubota, Yanmar, Bolens, Iseki, Massey-Ferguson, Case, Ford, Mitsubishi, Cub Cadet, New Holland, John Deere and other...

Though my Kubota B7100 was a good machine overall, it was getting harder to get my leg over the center hump--especially when my knee was acting up, AND, the lack of power steering made it a workout to use the loader. I put and the backhoe up for sale this spring, thinking I could move it...

I picked up a Yanmar RS 1200 tiller for my Kubota B7100 the other day. It's a 48" wide, shaft-driven tiller, that uses a standard 1 3/8" x 6 spline coupling. These were made both in a proprietary 2 point configuration, and a 3 point configuration. Mine is a 3 point, but a previous owner still...