Garden Tractor Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-18 of 18 Results
  1. Massey, Snapper, AMF Tractor Forum
    Late last fall I picked up a MF10 on an impulse. It looked good from ten feet and it didn't look like too many people had been "fixing" it over it's fifty two years of service. Tin looked pretty good and straight. Tranny shifts crisp and positive and a quick pull of the tranny drain plug didn't...
  2. Garden Tractor Forum
    Being new here and not knowing my way around, figured I might as well try to do it right. I've started a complete tear down of a 1971 MF10 and might as well document it for entertainment. What is the proper placement for a thread like this? As it sat when I went to look at it.
  3. Tractors
    Hey Guys, selling my baby...I mean, my MF10!! bought it this summer but just running out of time to fine tune it. Included is the original mower and snow thrower both in very good shape and working well. I replaced the original Tecumseh engine with a Honda GX390, the Tecumseh was chocking when...
  4. Massey, Snapper, AMF Tractor Forum
    Hey Guys! Newbie here from Canada, I've been working on an MF10 for a couple of months and I think I'm pretty close to success but I would like your inputs on how to solve a brake issue...the drum was broken when I bought the tractor....soldered it twice but it keeps falling apart, I also have...
  5. Massey, Snapper, AMF Tractor Forum
    Just bought a mf10. Started mowing with it and the belt that goes from the engagement to the deck came off a long with the pulley. It looks like all that holds it on is a key way and a set screw. Is this right. Talked to previous owner and they said it was tight when they put the deck back...
  6. Tractors
    I bought this MF10 Variable Speed recently at a sale on a whim (Grandpa had a MF14). It starts and runs well and the tractor looks like the paint has been redone. I've had it out to play several times and it is a blast. It could mow now, but I can tell the steering needs adjusted to equalize...
  7. Massey, Snapper, AMF Tractor Forum
    I have a 1967 MF10 with hydro-speed transmission. This tractor has been a hobby of mine for the last 3 years, working on it whenever I had an hour to spare. I now have it running relatively well, with one BIG exception - I can't shift the transmission with the engine running without clashing...
  8. Tractors
    have personally used every attachment. It has a mower deck, snowblower, tiller, and blade. Also have tire chains and manuals for everything including a service manual for the tractor. Someone put aftermarket headlights in it but they work great. This tractor runs and drives great, but has an...
  9. Massey, Snapper, AMF Tractor Forum
    Looking to see if anyone can tell me anything about this mf10. I know the early models had aluminum nose and dash before switching to plastic, but this has cast iron. Also i have never seen one with this type of hood. Can not fine any kind of model or serial number on it, just some numbers...
  10. Massey, Snapper, AMF Tractor Forum
    I need to find a replacement for a 1967 Massey Ferguson 10 steering wheel. I've searched everywhere and discovered they're NLA. Nothing has even shown up on eBay. Is there another wheel that will fit, even though it might not have been made for the MF 10 or 12? I'm not restoring the machine...
  11. Massey, Snapper, AMF Tractor Forum
    Hey all, I'm really having trouble setting the edge gap on my '66 MF-10. It's a magneto ignition engine with S/G. I believe that to set the edge gap for the coil / magnet on flywheel I must leave a .020 gap from the first pole of the coil. The points are supposed to begin opening at this time...
  12. Archives
    I sent a question regarding serial number & dash composition. At some point, it had a snowblower (belt pulley cover & chute rod holder)
  13. Massey, Snapper, AMF Tractor Forum
    After seeing some of the other comparison threads, I asked my Grandpa if I could "borrow" his 1970 MF165. We did a little posing and here are the pics. I hope you enjoy.
  14. Massey, Snapper, AMF Tractor Forum
    Hey all, I need a bit of help. I'm in the reassembly stages of a MF10 restoration, and I'm getting quite frustrated with the assembly of the undercarriage of the tractor. Can someone take a few pictures of their MF10 with their mower deck detached so I can see the routing of the springs and...
  15. GEDC2234

    My Kids on their Tractors. Commando 8 for Kaylen and MF10 for Ryan
  16. GEDC2233

    MF10Ryan on his MF10 waiting for the start of the activities.
  17. Archives
    MF 10 and wide tiller. Missing some attachment bkts, looks like the gear box is there.
1-18 of 18 Results