Garden Tractor Forums banner
pump

Discussions Showcase Albums Media Media Comments Tags

1-7 of 7 Results
  1. Garden Tractor Forum
    I want to buy a manual fuel transfer pump but when I look at them on the Internet they don't tell me enough to make an informed decision. Here's two I'm interested in: Roughneck Two-Way Rotary Pump Kit Unipump Manual Fuel Transfer Pump I use regular 5-gallon plastic fuel containers -- not...
  2. Mechanical & Hydraulics Forum
    Good morning all, I have a 1975 MF16 and just bought a Johnson Work Horse Midget 10 Loader without any pump. I am not familiar with hydraulics and need to configure a hydraulic pump whether PTO, inline shaft, or electric. Could I tap into the mower deck hydraulic lift lines? If anyone could...
  3. Montgomery Wards Tractor Forum
    Does anyone know what the pulley ratio or what the RPM speed of a hydraulic lift pump on a Montgomery Wards 16 33145A should be.
  4. Parts
    I am in need of a hydraulic lift pump. I have a Montgomery Ward Tractor that I am putting hydraulics on. The original pump for these tractors is a Century Fox 15A75 I believe. I would be interested in almost any hydraulic lift pump.
  5. Montgomery Wards Tractor Forum
    Would anyone be able to tell me the specifications on the hydraulic pump for the deck lift on a Montgomery Wards 16 tractor. I want to convert my manual lift over to hydraulics but I am cant find any specifics on the pump type, flow rate, and pressure. Does this pump have an internal reservoir...
  6. Sears, Craftsman Tractor Forum
    I have a '79 SS16 Sears, it has the Onan twin on it. I'm putting a new electric fuel pump on it. I had rebuilt the carb about 3 years ago, including the stock fuel pump that's on it, and it never really ran since, I didn't have time to fiddle with it so I pushed it into the back of my shop and...
  7. Parts
    I have left-over parts from the two John Deere 312s that I combined to make one. Here is a list of the items that are available at this time but might have others if you give me a chance to get them out of storage. $50 - fender pan (same as 314) - needs some cracks welded and partially...
1-7 of 7 Results
Top