Garden Tractor Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-2 of 2 Results
  1. Cub Cadet Tractor Forum
    I took out the drive shaft from my free cub 1811 because the rag joints need to be replaced. After I removed the shaft I noticed that the drive shaft ends were all worn down. I've looked up the parts and I've found the self aligning bushing, the drive shaft flange (mounted to the motor) and a...
  2. Bolens Tractor Forum
    Evening All, I had to remove my PTO on the 1220 because the small Torrington bearing next to the pulley failed,this I think is a poor design on a otherwise great PTO there is a large roller bearing at the front for the Snowcaster but the belt load and mower deck is supported by a bearing which...
1-2 of 2 Results