Garden Tractor Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 21 Results
  1. Garden Tractor Forum
    Hello all. My race mower currently has a Peerless 920 transmission. This transmission works great, except for one thing. I ordered some gears for the inside that were made for an 820. Here's where the hard part comes in. Since it would be too hard and expensive to make new gears compatible with...
  2. Bolens Tractor Forum
    Still a newb, but trying hard to learn and increase my skillset on small engines. I suddenly seem to be having more issues with my G14 (engine is tecumseh HH140, at one point in its life a new short block was installed). For the past couple months, the engine surges/hunts. I suspect a worn out...
  3. Bolens Tractor Forum
    What do you guys do for a transaxle flush? Keep in mind my bolens was sitting in a basement for 30 years untouched, and I'm sure there was no transaxle fluid change immediately beforehand. Normally i'd just warm it up, drain the old and in with the new but since it's been sitting so long and I...
  4. Husqvarna Tractor Forum
    I picked up an older Husqvarna YTH21V48? tractor with a bad Peerless H2000-006A unit. I found another one and installed it. Tractor moves fine, but Neutral is not where it should be. You put it in neutral and it will creep forward or reverse, depending on which side of the gate you were in. The...
  5. Craigslist / Ebay / Kijiji Finds
  6. Cub Cadet Tractor Forum
    I bought this 123 for my son about a year ago. We got it running back in the summer but notice that the transaxle has 2 broken bolt where it bolts to the frame. The internal brake plunger is also stuck so the brakes don't work. The only way to really solve the problems is to pull out the...
  7. Husqvarna Tractor Forum
    I have a 2013 Craftsman 42 inch 21hp riding mower manufactured by Husqvarna with a Tuff Torq transaxle. I recently threw the drive belt and destroyed the plastic calling fan on the transaxle. I bought a replacement fan but I cannot figure-out anyway to "lock" the transaxle so that I can remove...
  8. Parts
    For Sale: Misc 1967 Bolens 1050 parts Hood & grill assembly Seat Pan Fender Steering support with steering wheel Transaxle assembly Mower Deck (green) Instrument panel (aluminum) Rear Rims (one with tire) Front Rims (both with tires) Pedals & Foot pads Misc attachment parts Front...
  9. Allis Chalmers, Simplicity Tractor Forum
    I am desperatly lookin for a 6211 gearbox/transaxle. Does anybody know where I could find one. Are these rare tractors,or am I not looking in the right places?
  10. Sears, Craftsman Tractor Forum
    I have a Craftsman YT4500 ( model 917.288900) tractor that I bought new 3 years ago. It has 50 hours on it now. Last week it stopped moving. I found the drive belt had come off of the transaxle so I put it back on. It immediately came off. It looks like there is a plate that hangs down from...
  11. Ariens Tractor Forum
    The speed selector/transaxle is hard to shift. I know that it is a sealed system that I don't want to get into. Is there anything that I can tighten or whatever that might help this condition?
  12. Parts
    I am looking for a input shaft for a bolens 800 3 speed transmission. Pm me If you have the shaft, or if you are at a reasonable distance away, a parts tractor or whole transmission. Thanks Damon
  13. Parts
    for sale: refurbished bull gear for eaton transaxle. these are used in QT 16 & QT 17 and others with the eaton transaxle. send me yours and i will send you my refurbished one. $200 plus shipping, about $15
  14. Bolens Tractor Forum
    here is something i learned while restoring my 1974 QT16. transaxle seemed sluggish while driving. i thought my hydraulic pump/motor was dying. turned out to be the bull gear inside the transaxle was badly worn. this shows up as backlash in the drive wheel. i jacked up the transaxle to see if it...
  15. Sears, Craftsman Tractor Forum
    Here is the tech article I just finished on my tutorial, hope it can help someone in the future.
  16. Sears, Craftsman Tractor Forum
    Hello to you all. Here's the deal.... I've got a Roper / Sears GT18 Twin B&S 6 Speed that's seen roughly 6000hrs of use over its' life. I picked it up from my inlaws after about 2000hrs. At that time the low range didn't function at all. I was told that it lost low drive gears just after the...
  17. Mechanical & Hydraulics Forum
    Wanted to say I am enjoying you site. I recently acquired a 1986 JD214 which I am repairing (not restoring). I got what "needed" repairing done and moved on to the noisy transaxle. I have since done some reading and found this is normal for an older 200 series and to simply put a good quality...
  18. Massey, Snapper, AMF Tractor Forum
    Thought I had an engine oil leak, but upon inspection I saw oil dripping off the transaxle case. Crawled underneath and saw transmission oil all over the side of the frame and the frame-half of the driven pulley. So I read up in the manual, and thought I'd pull the transaxle level plug out and...
  19. Massey, Snapper, AMF Tractor Forum
    A few days back I changed the ATF in my MF-14 (Peerless #2504 transaxle). I received some great feedback from guys about fluid type, dipstick length and what to do while fill the transaxle with 5 quarts of ATF (slow go was the report). Well, I decided to "help" the process along so I rigged up...
  20. John Deere Tractor Forum
    Hi Has anyone try to fix a transaxle. If you have please give me tip or tricks. My 74 110 need shaft. I got a part transaxle from a 78 214 low hour on the parts transaxle. My dealer say look for c19 on the parts transaxle. What can I find this number the numbers I found are part numbers?
1-20 of 21 Results