Garden Tractor Forums banner
wisconsin
1-20 of 40 Results
  1. Off Topic
    Found this sign on marketplace. I drove 4 hrs. round trip yesterday to pick it up. I wife wanted to know what I wanted for Christmas and this is one thing that I showed her and she said "ok". It was very dirty and I had to scrub the plastic with a scotch brite pad. Everything works good. It...
  2. Bolens Tractor Forum
    I am so close to finishing my Winter project of restoring a Bolens 1050 with a Wisconsin TR-10D engine and I've hit a brick wall! One of the last things I needed to do was replace the breaker points in the TR-10D, but I lost the set screw that mounts the points assembly. No problem right? Well...
  3. Bolens Tractor Forum
    Hey everyone I just did a transaxle flush on my bolens 1000 and was just wondering if their was a safe cleaning solvent or solution to flush out the old sludge and grime without harming the brass parts? I know I have to use GL-1 mineral oil (which is the hardest Crap to find! Lol) so I don’t...
  4. Bolens Tractor Forum
    had a though that someone else might have had this same issue and same thought process and may have already found a good solution my cousin and I bought a pair of old bolens a couple years ago. We're pretty mechanical, however, these pre-date us by a few years. I took the 650, he took the...
  5. Bolens Tractor Forum
    We got quite a bit of snow over the weekend in the northeast and we probably got at least a foot to 16" of snow here in the Albany area. So, Sunday I needed to try to fire up my Bolens Estate Keeper to snowblow my driveway. Earlier in December, I got the Sno-Caster attachment (and my plow...
  6. Craigslist / Ebay / Kijiji Finds
    https://cedarrapids.craigslist.org/grd/d/wisconsin-engine-model-vg4d/6534871023.html
  7. Bolens Tractor Forum
    Anyone know if i should add lead additive to fuel for the wisconsin THD engines?
  8. Bolens Tractor Forum
    Okay, so before I start, in case anyone tries to flame me or give me a hard time saying that this topic has already been covered elsewhere on the forums and if I just searched for the answers, they are already out there, I have been SUPER busy lately with everything going on in my life at the...
  9. Parts
    I need a complete running AFC or AFH Wisconsin to put on a Case NL stationary hand tie hay baler. The engine on this one had cracked head and block when we tore down and magnafluxed it. This belongs to our tractor club and it is a local machine--would really like to find a correct engine...
  10. Bolens Tractor Forum
    Hello to all, Been reading some of the posts, and well, Seems like a great place to ask questions. I'm a newbie, so please excuse my ignorance, and I'll apologize now if I'm in the wrong forum. So I'm looking for a tractor with a plow or snow-thrower, and there is little out there in the...
  11. Walk Behind Garden Tractor Forum
    Well after a break with the hit and miss engines I was visiting the local scrap yard and spotted a pair of Waterloo walk behind tractors they are rather tough but though over time I could make one tractor from two .After visting the Wisconsin web site I learned the Model AB were made in Feburay...
  12. Bolens Tractor Forum
    Excited to get this machine on the garlic field this fall 2016 to plant. My dad just passed and I get all his awesome stuff, and the land too! long story short he was a collector and avid disassembler' this Bolens was complete but I have to build the missing parts (trust me I looked everywhere)...
  13. Tractors
    Bear Cat for sale. Made by Ferguson Research in the 60s. Very Rare. All wheel drive with hydraulic steering and blade. Wisconsin v4 gas engine. Manual trans - I am guessing its a 3 speed. Chevy 5 lug axles. Turns over so far but I have not tried to start it. Local delivery available. out of the...
  14. Bolens Tractor Forum
    I finally got around to changing the oil on one of my EK-10 Estate Keepers, which was long overdue. I have not changed the oil on this tractor yet since I purchased it about 3 years ago (partially since it was sitting in the garage for 2 years not running before I rebuilt the carburetor on it...
  15. Bolens Tractor Forum
    Well, I just got back home after spending all day on my latest road trip. I must have the same luck as Old Buzzard though when it comes to road trips as it was raining like hell out for a good portion of the drive... :( I may have gotten a little wet, but I wasn't going to be deterred today...
  16. Craigslist / Ebay / Kijiji Finds
    Don't see one of these every day: http://minneapolis.craigslist.org/csw/grd/5637770634.html
  17. Power King, Economy Tractor Forum
    I'm looking for information regarding the clutch assembly on a 1958 Economy with Wisconsin AENL engine. Is there a spacer or bushing that sets the proper distance for mounting the clutch flywheel/pulley assembly onto the engine's output shaft? I'm guessing that something is required in order...
  18. Parts
    Looking for a Walbro carb for S 12 D Wisconsin engine on a bolens 1250. Any condition. I need internal parts. PM me if you can help. Thanks Jim
  19. Bolens Tractor Forum
    I am having a heck of a time with my 1968 Bolens Estate Keeper EK-10. It has sat for a couple of years since it stopped running a while ago and I haven't had the chance to try to fix it for a while. I started working on it earlier in the summer and I found the gas tank looked pretty rusty and...
  20. Bolens Tractor Forum
    I have a Bolens 1050 that I bought a few years ago for $400 dollars with several attachments, weights, chains etc. Well, I had been using it year round and finally decided it was time to go through everything like I had when I first got it. Rear end play, lubrication, oil changes etc. My...
1-20 of 40 Results
Top