Garden Tractor Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Hi guys, when I was cutting the grass yesterday with my 129 and the pulley and bracket that puts tension on the deck belt came flying out. So I picked up the pieces and took it back to the shop. It looks like I am missing a pin that would go thru the deck bracket and into the pulley bracket and then into the other side. With a cotter pin on the outside.

Does anyone know of a part number for this?

I looked in my manual I cannot find it.

Here is pic, it is the dark ring area that looks like something should go thru it.
auyruq.jpg
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #4 ·
Thanks 48 willys that is exactly what I was looking for. I did manage to fabricate one out of 1/2 inch threaded rod. It is holding for now. It seems pretty tight. I did not realize that was 1 long pin. I thought it was two pins.

anyway thanks a lot, you made this repair a lot easier.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top