Garden Tractor Forums banner
1 - 3 of 3 Posts

3 Posts
Discussion Starter · #1 ·
Back again. As you stated previously lot of work to remove engine. Can you advise, I got p & c to hook up, have wire probably coming from coil & it hooks to p & c. Does that wire & condenser wire both hook to screw on points? When I got it, that wire came to p & c was twisted & had wire nut on it, but condenser was hanging loose & the wire from the wire nut was hooked to the screw on the p & c. The bare & bend in the wire is where the wire nut was at. Thank You for any aid assistance you could give me.
Automotive lighting Automotive tire Wood Bumper Fender
Automotive lighting Wood Gas Tints and shades Snout
Automotive tire Automotive lighting Bumper Fender Gas

1 - 3 of 3 Posts