Garden Tractor Forums banner
1 - 10 of 10 Posts

·
Super Moderator
Joined
·
6,682 Posts
With my homemade box blade, that I made 10 years ago. I put teeth on it about 5 years ago. The teeth come of by removing three bolts. I welded all this together with a cutting torch and steel welding rods. It has worked great over the years. So, I did some driveway work today and have much more to do.

Noel
 

Attachments

·
Super Moderator
Joined
·
6,682 Posts
Discussion Starter · #5 ·
The lift is on the weighted side. It lifts that side of the box blade first. So I put weight there to help keep it more level. It helps a little. If I want to crown a little, I put the weight on the other side.

Noel
 
  • Like
Reactions: boyscout862

·
Registered
Joined
·
1,585 Posts
With my homemade box blade, that I made 10 years ago. I put teeth on it about 5 years ago. The teeth come of by removing three bolts. I welded all this together with a cutting torch and steel welding rods. It has worked great over the years. So, I did some driveway work today and have much more to do.

Noel
I need a unit like that!
 

·
Super Moderator
Joined
·
6,682 Posts
Discussion Starter · #10 ·
1/2" cold rolled bar was used to make the teeth.

Noel
 
  • Like
Reactions: massey driver
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top