Garden Tractor Forums banner

1 - 4 of 4 Posts

·
New Member
Joined
·
11 Posts
Discussion Starter · #1 ·
The housing on my governor is cracked where it is bolted to the gear cover. I have a replacement governor. Is there more to it than getting the engine at top dead center and seeing the timing mark on the governor Gear through the Site hole and should I be replacing the gear cover gasket?
Where is a good place to purchase a gasket set for a K 532?

IMG_00000108.jpg
IMG_00000104.jpg

Thanks
Jonathan
 

Attachments

·
Registered
Joined
·
10,070 Posts
Hello and welcome to GTT. That is a nice tractor. I get my parts from NAPA. There is another thread on here about the best places to get parts in Canada. I'll look for it.

You can go to EBAY.There are a couple of dealers that are good. We have several site sponsors that may be able to help you: http://gardentractor...-site-sponsors/ . Here is the thread for Canadian parts: http://gardentractor...rts#entry232042.

The Kohler manual is in the Manuals section for download.
 

·
Tractorholic
Joined
·
8,348 Posts
Welcome to GTTalk , can't help you with the part your looking for , maybe one of the site sponsors would have what you need .Al
 
1 - 4 of 4 Posts
Top