Garden Tractor Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter · #1 ·
I have a hydrostatic rear end I believe from a 127. There's no filter on it and the one I bought for it seems to be to big a diameter for it. Can anybody tell me the correct WIX number for it.
 

·
Registered
Joined
·
95 Posts
Discussion Starter · #3 ·
That's the one I tried on it but it seems to be to close to the rubber disc on the drive line.. I bought a 127 new, back in the early 70s

change the oil in the tranny once before I decided the tractor was worn out and got rid of it. Seems the filter was smaller diameter.
 

·
Registered
Joined
·
51 Posts
They ride really close, and if the rubber flex disc it warped and out of round really bad it might even rub a little.
 
  • Like
Reactions: Dave Central NY
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top