[Auburn David]

Ingersol 6018 with Dig-It 188T backhoe..I cant seem to find any part numbers on any of the cylinders and I have atleast 2 that need rebuilds/replaced.

If I past a photo or 2 of what I have over the next day or so ,is there anyone that might be able to look at them and give me some info on what I might have?

 

[boyscout862]

Sometimes it is cheaper to replace than rebuild. Try https://www.surpluscenter.com/ and http://www.baileyhydraulics.com/ . Good Luck, Rick

 

[Auburn David]

Sometimes it is cheaper to replace than rebuild. Try https://www.surpluscenter.com/ and http://www.baileyhydraulics.com/ . Good Luck, Rick

I dont know what i need though...or even how to look it up.

 

[backyardtinker]

get the cylinders apart and bring them by your local hydraulic repair shop and they can likely match up the appropriate packing seals

 

[boyscout862]

I dont know what i need though...or even how to look it up.

Those catalogs are just fun to look through, even if you don't know what you are looking for. The surplus center does have some educational info on hydraulics that you can look at online. Good Luck, Rick