Garden Tractor Forums banner
1 - 1 of 1 Posts

·
Got Sum
Joined
·
1,223 Posts
Maybe these will help , pic #1 are the frame mounts where pic#2 slide up in between and the clevis pin slides thru all and allows pivot movement plus secures it to unit. Pic#3 are your lift rods and they attach to your rockshaft which allows lift and down pressure via your hydraulic lift cylinder.There are two sets of ears on your rock shaft as you stroke the cylinder you will see how the rockshaft rotates and will pivot the blade via the mounts , attach to the correct set of ears that allows said movement, ( I believe it's the rear most set of ears)
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top