Garden Tractor Forums banner
1 - 4 of 4 Posts

·
Senior Member
Joined
·
4,482 Posts
Discussion Starter · #1 ·
In between working on the 4855 I took a look at the exhaust on a 1655 I bought at last years FFA auction. It had a bad exhaust leak. Found the threaded in exhaust pipe came loose and PO ran it that way for a long time thus removing all the threads.

Automotive tire Motor vehicle Gas Automotive fuel system Automotive wheel system

The holes for the bolt on flange were still good so I cut a flange and pipe off one of the P series mufflers I have and used that. I also wanted to convert it o a verticle exhaust while I was at it. I fabricated a crossover pipe using the P series flange and 1.5" pipe.

Motor vehicle Automotive tire Automotive exterior Toolroom Engineering

I'll Post more pics when I get the rest completed.
 

Attachments

·
Super Moderator
Joined
·
54,473 Posts
Looks like it should work, ducky! I need some of that 1.5" pipe!
 
  • Like
Reactions: ducky
1 - 4 of 4 Posts
Top