Garden Tractor Forums banner
1 - 6 of 6 Posts

·
New Member
Joined
·
41 Posts
Discussion Starter · #1 ·
I'm looking for a replacement bearing carrier for one of the blade spindles in my deck. Any chance this is a commonly available part used in something else? The triangular flange is in good shape but the bearing sleeve is frapped. I could weld on some new tube a bore it but my shop's a mess so that's a last resort.

Thanks, Greg
 

·
Elf guardian
Joined
·
7,712 Posts
Hi.

According to Jackssmallengines.com they are still available.
Part# 511283M2 $55

Just incase you're not familiar with it.
agropartsbooks.com shows schematics for the MF tractors. Just sign in as guest.
 

·
New Member
Joined
·
41 Posts
Discussion Starter · #3 ·
Thanks! I'm amazed it's still available new. And that link for the part numbers is very handy.

Thanks again.

Cheers, Greg
 

·
New Member
Joined
·
41 Posts
Discussion Starter · #4 ·
Got the new part and set it up in the lathe.



bored it out and cut a new snap ring groove



two 6005-2Rs sealed bearings and a spacer



and voila!



Sunday past she cut lawn for the first time in a while ;-)

Greg
 

·
Super Moderator
Joined
·
54,362 Posts
Glad you could find a part close enough to work. Must be nice to have tools to rework parts like that!
 

·
Registered
Joined
·
16 Posts
explanation please.

if the part was available as in post 2 why did you have to cut it on the lathe in post 4?

i do not have lathe access however would be interested in "Jackssmallengines.com Part# 511283M2" if that is the spindle i can use on my MF 610 without modifications.
 
1 - 6 of 6 Posts
Top