Garden Tractor Forums banner

1 - 12 of 12 Posts

·
Old Iron Junky
Joined
·
1,359 Posts
Discussion Starter · #1 ·
Today was another successful day of selling, trailers almost empty and some cash in the pocket. It was super crazy for people walking around buying, so I didn't get a chance to walk around much but did happen to find some wheel wieghts. I'm thinking they're the older bolens ones, but they have 4 holes instead of 2. Do you guys think that they're bolens?

008.JPG 009.JPG

Then how common are the 10" bolens wieghts? May have found a set.
 

Attachments

  • Like
Reactions: jdslednut

·
Old Iron Junky
Joined
·
1,359 Posts
Discussion Starter · #4 ·

·
Premium Member
Joined
·
5,740 Posts
There 50's bolens wieghts there is no part number on them.
 

·
Old Iron Junky
Joined
·
1,359 Posts
Discussion Starter · #6 ·
So the stack you have in your shed and the ones Adam has are older than these?
 

·
Premium Member
Joined
·
5,740 Posts
  • Like
Reactions: Nato77

·
Old Iron Junky
Joined
·
1,359 Posts
Discussion Starter · #8 ·
Todays finds consisted of a Bolens 733, 10" Bolens wieghts, DB seeder, and some new tires for the Power Ho. I know no pics, but the sister in law took some and tried to send them but didn't work. Going back tomorrow to find some last day deals to fill the trailer back up :D
 

·
Old Iron Junky
Joined
·
1,359 Posts
Discussion Starter · #9 ·
[sharedmedia=core:attachments:69201]

He's a few pics of the purchases this weekend.

First is the Huski 733 I got. She's rough but fixable.

[sharedmedia=core:attachments:69197]
[sharedmedia=core:attachments:69196]

Here's the 10" weights. The number, what I can read of it, is 171-1705? What I can't quite believe is they weigh 47lbs.

[sharedmedia=core:attachments:69198]
[sharedmedia=core:attachments:69199]

Then the DB seeder and a push blade for a Wards walk behind and some of the 50+ tires and rims I just couldn't pass up on.

[sharedmedia=core:attachments:69200]
[sharedmedia=core:attachments:69202]

Also a pic of the new rubber for the Power Ho.

[sharedmedia=core:attachments:69204]
 

·
Premium Member
Joined
·
5,740 Posts
The 10" weights should fit on the back rims of the 733....
 

·
Old Iron Junky
Joined
·
1,359 Posts
Discussion Starter · #11 ·
The 10" weights should fit on the back rims of the 733....
They do. I spent a good half hour chipping all the cement out of one side. Whoever put that cement in them rims is a couple cards short of a full deck. They had the valve stem set in the cement with no way to put air in.
 

·
Tractorholic
Joined
·
938 Posts
I saw that bolens there. Had to look twice cause I thought it sure looked like my 770. Glad you got it.
 
  • Like
Reactions: Nato77
1 - 12 of 12 Posts
Top