Garden Tractor Forums banner
1 - 6 of 6 Posts

·
Tractorholic
Joined
·
1,641 Posts
Discussion Starter · #1 ·
Anybody out there got a closeup pic of how to wind the cable for the chute rotater? My cable was gone when I got it and I am not sure how to wrap it around the handle so it unwinds in one direction while pulling the other at the same time. I believe it has to hook with a loop on the cable ends on the one bolt on the chute. The picture in the manual is not cear enough. I made up my own cable and believe that the ends need to loop thru each other, at least the old one looked like it did.

Thanks guys
 

·
Tractorholic
Joined
·
1,641 Posts
Discussion Starter · #3 ·
Thank you for the picture Bud. Mine has the old style chute rotater though which is different and the picture is not much clearer than what I was able to down load. Thank you anyway though for helping.
 

·
Tractorholic
Joined
·
1,641 Posts
Discussion Starter · #6 ·
Thank you Alan, that is EXACTLYwhat I needed! You da man!
 
  • Like
Reactions: MH81
1 - 6 of 6 Posts
Top