Garden Tractor Forums banner
1 - 1 of 1 Posts

·
Fixer of Broken junk
Joined
·
5,021 Posts
Plastic containers With any petroleum based contents will be pretty hard to get Bonded to where it doesn't leak.If it was made of PVC there are Alot of different bonding that would work.If it was a small crack or hole you could Plasti-Weld it.There are Some products that claim to be Solvent resistant but most that I've tried in the past has leaked aftera short time on plastic fuel tanks and the sort.

This stuff might work.It's supposed to bond very well.But I have not used it.

http://www.homedepot.com/p/Loctite-Plastics-Bonding-System-681925/100371829

You could use a Metal tank off of a slightly older model.They're going for $20 shipped on Ebay.

http://www.ebay.com/itm/Polaris-Sportsman-400-4x4-01-02-Oil-Tank-8148-/301150708786?pt=Motors_ATV_Parts_Accessories&hash=item461dfb2432&vxp=mtr

Or a Used Plastic tank like yours.They're going for around $50 shipped

http://www.ebay.com/itm/POLARIS-SPORTSMAN-400-LATE-04-OIL-TANK-W-DIPSTICK-/371107370609?pt=Motors_ATV_Parts_Accessories&hash=item5667b91671&vxp=mtr
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top