I work all the time now and am not around much so updates will probably be slow so bear with me. As a history, here is a link to the how the previous owner acquired it. http://gardentractortalk.com/forums/topic/10104-monster-tiller/?hl=+monster%20+tiller I don't really have any pictures. Last year near the end of October I took the trek from Bernville PA up to Michigan (can't remember the town) Which was quite a ride. I arrived in town late and slept over in a nearby parking lot until morning. I was en-route to my families place in Buffalo NY so I had a Honda 200s 3 wheeler on the truck to begin with. After picking up the tiller from kubotakid that morning I was very overloaded and rubbing my tires on the bed so I limped the rig down the road to the nearest auto parts store, bought and then installed some helper springs in the parking lot. I then drove towards NY. My next stop was in Oberlin Ohio at OldBuzzards place where he has quite an extensive collection of Bolens tractors and implements. I picked up some Bolens accessories for Newpaws493 there and then jumped back on the interstate. I arrived in Buffalo NY that night at 7 pm after driving all day in the rain. That is how I acquired the tiller. Since then the engine has been removed and dissembled and a gasket kit was bought for it. That is how it sits today. Slow progress but my brother is doing the work so far. Hopefully next year I will have time for tinkering again. The tiller will probably be done by then but I doubt I will be out of projects.