Garden Tractor Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
9,346 Posts
If your going to use crimp connectors make sure you have a good crimping tool. Most of those thin ones are junk to start with and twist when you put some pressure on the handles. Most electrical supply places will have the good crimping pliers on hand. A good pair will have a contact surface a good 1/8" wide or wider. Cheep ones are about 1/16". Make sure you have the connector in the tool right also.
 
  • Like
Reactions: Bill 76
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top