That electric depot place looks like has neat items. Plastic term ends and the special click-in tabs for them are great! I'll have to look into that sometime. ON old cars if you could get the whole wire loom out and on a bench, you could unwrap the tape or plastic or cut open and take one wire at time to make copies of and lay out on another table till all were made and then wire tie and re-wrap or use that flex loom to hold it together again as a harness. Sometimes hard to get the whole thing out of these tractors tho and have to put much back in a wire at time right in the chassis as you go. Many times I use loops and holders on frame in more spots than company did, just because!