Garden Tractor Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6,076 Posts
something, I knew there were tees from the factory on the cylinder that raises and lowers the deck on my MF 14. Normally hoses would be hooked up there for the 3 point hitch. So I figured I could run hoses and hook up a cylinder to my snow plow on the front. Which I did. No more gittin off to change angle. But another thing I wanted to do is put a sleeve hitch on the rear to operate the sleeve hitch attachments I have on the MF 14, so now I will be able to move the plow angle cylinder and hoses to the rear in the summer to operate the sleeve hitch. But there could be more tees and another cylinder hooked up so I don't have move cylinders. Hehe.
Still have to tie hoses up yet.

Noel
 

Attachments

1 - 2 of 2 Posts
Top