Garden Tractor Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
319 Posts
When I swapped transmissions a couple years ago from 3 to 6 speed, I found it useful to loosen the bolts securing the tubes to the angle center support (and of course the deck pan) all the way to the front bolster. This way they could be easily spread without being bent. A few taps with a mallet on a block of wood persuaded the transmission to start its roll back.




Sent from my iPhone using Tapatalk
 
1 - 1 of 1 Posts
Top