Garden Tractor Forums banner
1 - 7 of 7 Posts

·
Tractorholic
Joined
·
8,457 Posts
Just checked the Pocono CL to see if the 2 DBs were still for sale one had reverse but it was one of the older ones so it might not have fit anyway. Is that bracket that model only ? Was yours missing or broken? On my 600 the bushings are worn pretty good , some day I'll need to address that
 
  • Like
Reactions: dblover

·
Registered
Joined
·
160 Posts
Just checked the Pocono CL to see if the 2 DBs were still for sale one had reverse but it was one of the older ones so it might not have fit anyway. Is that bracket that model only ? Was yours missing or broken? On my 600 the bushings are worn pretty good , some day I'll need to address that
My DB came with everything for the reverser except that little bracket/pulley. I have everything in the picture and the shift rod - except the bracket that runs from about 7 o'clock to the center of the pic. The bracket has a v-belt pulley on it that attaches to the middle of it.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top