i have a yth2448 that was parked after the pto switch went bad then mice built a nest in the engine so then the dogs went after the mice and tore up the wiring harness I have most of it back together (soldered wires and shrink tubing hate cheap shit mashed together garbage) the problem now is the charging system i need to find the red diode holder/connector thing searched a lot but only find wires and tapes crap does anyone know thes pecs for this diode? also have a connector with a red wire and an orange wire right below the solenoid (in same connector)not showing on the diagrams Ive found. 1 wire was pulled off of stator will fix . it looks like both stator wires go to regulator but not sure where r ed wire off of reg goes (most likely to red circuit any help out there maybe someone else has one of these price was right as it was free