Garden Tractor Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
9,183 Posts
Discussion Starter · #1 ·
I have two implements that I cannot find manuals for. The first is a Mower deck, 42 inch, model number is 18422-01. The manuals sections list a 18421 then jumps to a 18423. Would one of these be the same and if so, which one?

My second item is a Snow Thrower. The model is 18514-04. I can only find manuals for the newer style with the drive shaft to the right. Mine has the open drive shaft to the left of the thrower. Any help on either or both would be greatly appreciated.

The thrower is operational, I hope. Have not done anything with the deck yet but want to put it in service next spring.
 

·
Registered
Joined
·
9,183 Posts
  • Like
Reactions: NUTNDUN

·
Premium Member
Joined
·
15,923 Posts
We can definitely get something added here. I am not sure on the mower deck. I know the guys that know more on the Bolens stuff will chime in, been a little quiet with the holidays.
 
  • Like
Reactions: chieffan

·
Registered
Joined
·
9,183 Posts
Discussion Starter · #4 ·
Yes, it has been a little quiet but it sure makes the net run faster. That is why I am doing my looking now. About time to find some covers though.
 

·
Registered
Joined
·
9,183 Posts
Discussion Starter · #6 ·
No big hurry for them. Just thought I would hunt them up now that things are a little slow around here. Especially quiet on the net so it runs a lot faster, even with a dish hook up.
 

·
Registered
Joined
·
9,183 Posts
Discussion Starter · #7 ·
I should have manuals for every mower and blower.... only problem is finding them :wallbanging:
Sounds like my filing system. Where ever I put it is where it is filed !
 

·
GT Tinkerer
Joined
·
1,346 Posts
Sounds like my filing system. Where ever I put it is where it is filed !
Sounds like my wife when I ask her where she put something I am looking for and she says she put it "up" but I still haven't found out where up is.
 

·
Registered
Joined
·
9,183 Posts
Discussion Starter · #10 ·
Got them printed off. Very readable and a lot more than what I had to start with. Appreciate the work on this. My work in the shop today and put the slot in the lift bar for the front blade. Several years ago I "acquired" a bunch of cross arms with their braces from the RR when they were clearing them out. Those 3/16" X 1 1/8" x 30" flat sure came in handy a lot of times. Heavy galvanized so that has to be burned off when welding, but they still work and the price is right. Will get it bent and the slot cut and it is ready to go.
 

·
Registered
Joined
·
9,183 Posts
Discussion Starter · #12 ·
Guess I didn't dig deep enough or wide enough did I? Looks like cosmetic difference between the -01&-02 series to my -04 series. Part numbers seem to be the same except for the rounded chute, etc. Thanks for finding that for me. I now have all the manuals for my Bolens equipment. Even for the 13 hp re-power I did.
 
1 - 12 of 12 Posts
Top