[KennyP]

Just purchased a project tracktor need some help to find out what year and how to find parts the serial decal
Is very faded but what I can make out is 26486 any help would be appreciated.

:wave: Welcome to the forum! Pics and more info will help a lot for these folks to figure it out. What engine? What rear tire size? Might be best to start a thread with this info!

 

[Geneo]

6/16 rear 14 horse KOlher will work on getting pics from my phone to iPad

 

[MNGB]

Welcome to the group, if that is your SN that would make it a 1972 model yr. they were still called Economy tractors and the model would have been a Power king. Does it have hydraulics, a 3 pt hitch or the lift hitch, single or dual trannys as for parts e bay is one place, here's a couple more:

http://www.powerkingtractorbarn.com/

http://powerkingtractor.com/

 

[April268]

I seen the 1989 powerking 1620 owners manual in your list could you tell me if it is posted in the manuals. We have a 1989 1620 powerking with a 60" RH discharge deck we need the drive belt and deck belt lengths to replace. The tractor was my fathers and when he passed we inherited the wonderful beast but my father replaced the belts before he passed away over 8 yrs ago and he never wrote down the length size, he just knew this stuff. We are hoping the owners manual will have belt lengths. Thank you for your time, this site is amazing, so full of valuable information we have been searching forever for so we can keep our beast in the best shape for a long time. They just don't make tractors like these anymore

 

[Username]

I seen the 1989 powerking 1620 owners manual in your list could you tell me if it is posted in the manuals. We have a 1989 1620 powerking with a 60" RH discharge deck we need the drive belt and deck belt lengths to replace. The tractor was my fathers and when he passed we inherited the wonderful beast but my father replaced the belts before he passed away over 8 yrs ago and he never wrote down the length size, he just knew this stuff. We are hoping the owners manual will have belt lengths. Thank you for your time, this site is amazing, so full of valuable information we have been searching forever for so we can keep our beast in the best shape for a long time. They just don't make tractors like these anymore

Try this:

 

[KennyP]

I seen the 1989 powerking 1620 owners manual in your list could you tell me if it is posted in the manuals. We have a 1989 1620 powerking with a 60" RH discharge deck we need the drive belt and deck belt lengths to replace. The tractor was my fathers and when he passed we inherited the wonderful beast but my father replaced the belts before he passed away over 8 yrs ago and he never wrote down the length size, he just knew this stuff. We are hoping the owners manual will have belt lengths. Thank you for your time, this site is amazing, so full of valuable information we have been searching forever for so we can keep our beast in the best shape for a long time. They just don't make tractors like these anymore

I'm not sure if I got it uploaded or not. I am NOT a pk guy so I have a hard time figuring what is what here!

 

[KennyP]

Guess I didn't! But it is now!

 

[KennyP]

I got side tracked along the way and am unsure what else needs uploaded!

 

[goldpanner 1]

I am interested in obtaining the thumb drive from Larry Goss. Could you provide the avenue to order?

Thanks in advance,

Gary

 

[KennyP]

I'll send you a PM.

 

[Coyote]

Hey KennyP, would you mind sending me the same PM for ordering the thumb drive. I just picked up a 67 jim dandy & plan on putting it back in service.

Thanks, Russ

 

[cpower2004@comcast.net]

I cannot remember where I have been so I willtry again. thanks for any help you can give me. I have a 1957 economy serial number4987 on the original tag on tractor it has 12 inch front wheels that are solid like an old chevy. the rears are 24 inch. it has 2 transmissions. no sheet metal on tunnel and no hood. has hand brakes. has a briggs engine 10 hp may not be original.has steering wheel. transmissons would not work wheh I got it. they were full of water after cleaning they work fine. engine runs great. final drives appear to be stuck as tractor will not roll. bought it at florida flywheelers meet in feb of this year. I am in Sarasota florida. my email is----cpower2004@comcast.net-----i do have pictures to post but I do not know how to do that as I am not computer savy. I have looked so many places and bought info that turned out not to be my tractor.look up florida flywheelers. it is 200 acres of farm equipment old buildings tractor pulls stationary engines large and small anything old and lots of tractors of all sizes.every hour or so they have a parade around park and anything with a engine and will roll is there restored and home built contraptions.i just retired 3 years ago and now get to play. I have a 1930 model a ford huckster-vegetable delivery truck- late 60s vw fire truck,late 60s vespas one with side car. I worked on elevators for 45 years. that's it. my name is Butch

 

[pianoman8t8]

I'm also interested in purchasing a drive. Recently picked up what appears to be an early 90's model 1620. Will post pics in the appropriate place shortly, along with S/N for reference. Thanks!

 

[KennyP]

I'm also interested in purchasing a drive. Recently picked up what appears to be an early 90's model 1620. Will post pics in the appropriate place shortly, along with S/N for reference. Thanks!

Look for a PM up by your screen name!

 

[BHamby]

Is anyone else doing the thumb drive with power king manuals?

 

[BHamby]

Is anyone else doing the thumb drive with power king manuals?

 

[MNGB]

Is anyone else doing the thumb drive with power king manuals?

Yes an updated version is available for sale om E Bay

https://www.ebay.com/itm/Power-King-Jim-Dandy-Economy-Tractor-Digital-Owners-Manual-1000s-Files/124163194893?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

 

[BHamby]

Thank you.

 

[WV-Harpo]

Thanks for the info, this is a great item to have!

 

[padroo]

I just ordered a thumb drive, thank you.